Compression Type Tension Clamp Assembly for 7/3.15 mm

compression-type-tension-clamp-assembly-earth-wire-hardware

Sl. No. Desc. Material Surface Treatment Qty.
1 Anchor Shackle Forged Steel-I/IV,  IS:2004 H.D.G. 2
2 Steel dead end Mild steel, IS:2062 H.D.G. 1
3 Jumper Mild steel, IS:2062 H.D.G. 1+1
4 Outer Aluminium Sleeve Al. (99.5% pure) 1
5 Filler Aluminium Sleeve Al. (99.5% pure) 2
6 Plain Washer M12 Mild Steel, IS:2062 H.D.G. 1
7 Spring Washer M12 Spring steel, IS:4072 E.G. 2
8 M12 Bolt & Nut Mild Steel, IS:1367 H.D.G. 2
9 M16 Bolt & Nut Mild Steel, IS:1367,5,6 H.D.G. 2
10 Plain Washer M16 Mild Steel, IS:2062 H.D.G. 2
11 Split pin Stainless Steel 2

* THE ABOVE DRAWING/SPECIFICATION IS AS PER OUR REGULAR SUPPLY.
* OTHER SIZES & SPECIFICATIONS UPON REQUEST (AS PER CUSTOMER’S DRAWING, SPECIFICATION OR SAMPLE)

Technical Data

  • Slipping strength of clamp assembly not less than 95% of UTS of earth wire
  • Breaking strength of hardware assembly 70kN
  • Fittings shall conform as per drawing
  • All ferrous parts shall be hot dip galvanised as per BS 729
  • Purity of aluminium – 99.5%
  • All dimensions are in mm.
  • General tolerance ±3%
  • Total weight – 3.0 kg approx.